HOME

Xylotex DM-1 with 116 oz.in. Stepper Motors Installed

Xylotex 3DB-116 Drive Box with Three 116 oz.in. Stepper Motors*


Xylotex DM-1 $800.00

please e-mail: support@xylotex.com for more info.


Base, Saddle, Table and Column are made of heavy duty Cast Iron

Table Size X: 9.4" Y: 5.6"

Axis

Travel (Inches)

Rapid Speed (IPM)

TPI - Steps/Inch

X

~6.0"

40+

18 - 28800

Y

~3.5"

40+

18 - 28800

Z

~8.0"

40+

16.93 - 27093

System Includes:

Plug & Play, Ready-to-Run

Xylotex DM-1 Micro Milling Machine

Xylotex 3DB-116 Three Axis Drive Box w/Stepper Motors

Dremel 395 MultiPro 5000rpm-35000 rpm Variable Speed Rotary Tool

PCB Test Cut

(Standard 0.1" spacing on the holes shown)

Make Your own PCB's using both of these software packages

Eagle PCB Software: http://www.cadsoft.de/

PCB-GCODE http://www.pcbgcode.org/

Compatible with the following CAM software:

  • EMC2 http://www.linuxcnc.org/
  • Mach3 http://www.machsupport.com/
  • TurboCNC http://www.dakeng.com/

Software support is handled by the Software Vendor/User Group, not through Xylotex

What you will need to complete a functional CNC system:
  • Xylotex DM-1 (120VAC for Drive Box and Dremel)
  • CNC CAM Software (e.g. Mach3)
  • Tooling (cutters - 1/8 end mill, Engraving bits...)
  • Stock (material to be processed - wax, PCB...)
  • Eye Protection Required. Ear & Resperatory Protection: as required

Other Recommended items:

  • Various Clamps/Vises/Tapes to hold work piece in place OR
  • MDF or other "Spoil Board"
  • Dremel High Speed Steel Cutter #115 to Ensure Flatness of Spoil Board
  • Bolts/Nuts to clamp Spoil Board to machine table

Shipping Information:

Uncrated Machine Weight ~63 lbs. (includes Steppers and Dremel - without Drive Box)

Crated Weight: TBD

There will be a $XX.00 Crating Cost if the Unit is Shipped (Local Pickup is OK)

The unit will ship via UPS Ground

Actual Shipping Cost Depends On Location.

USA Shipments ONLY.

California Shipments/Pickups will incur a 7.25% Slaes Tax

I have used this System to test cut various circuit boards and parts, so it not being sold as new


*The stepper motors are made by Pacific Scientific. They are RFE (Removed From Equipment)

The drive box ships with a new 6' 120VAC Power Cord and 3 foot Parallel Port Cable.

please e-mail: support@xylotex.com for more info.

Copyright © 2009 by Xylotex
All rights reserved
Revised -- 24-FEB-2009